FLEMINGTON SUPPLY, CO.
PO Box 2070, 178 Routes 202 & 31,
Flemington, NJ 08822
Tel: 908 782 2221 Fax: 908 788 0455

GPS Address Location for Shipping/Receiving:
3 Kuhl Road, Flemington, NJ 08822.

© 2000 Flemington Supply Co., Inc.
Liberty Model 237 Submersible Sump Pump

Liberty Model 237 Submersible Sump Pump

For information on purchasing this product please call Flemington Supply at (908)782-2221 or email us at sales@flemingtonsupply.com

Price does not include tax or shipping costs, Free Shipping Available in New Jersey

Picture of Item
Click Image to Enlarge

Price: $121.10

Type: 1/3 HP Sump Pump 2400GPH@5' Head

Warranty: Three Years

In Stock

Note: Please Mention This Ad When Ordering.

Description:

ALL MODELS FEATURE:
Vortex style impeller permits passage of solids without clogging. Made of high temp engineered thermoplastic.
Polypropylene and powder coated aluminum construction.
Stainless steel rotor shaft.
All fasteners – non-corrosive stainless steel.
Oil-filled, hermetically sealed motors with thermal overload protection.
Permanently lubricated upper and lower bearings. Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor. (25' length optional) For 25' cord option, add a “-2” suffix to model number. Example: 231-2 for Model 231 with 25' cord.
Removable base allows suction down to 1/8"

MOTOR SPECIFICATIONS:
1/3 hp. 60Hz
115V 3450 RPM
5.2a Oil Filled; Thermally Protected
Maximum Fluid Temperature 140 Degrees F.

DIMENSIONAL DATA:
Weight: 11 LBS.
Height: 10.5"
Major Width: 9.6"
Minimum Sump Diameter: 10"

3 Year Warranty

Liberty Pumps, Inc. warrants that pumps of its manufacture are free from all factory defects in material and workmanship for a period of 3 years from the date of purchase. The date of purchase shall be determined by a dated sales receipt noting the model and serial number of the pump. The dated sales receipt must accompany the returned pump if the date of return is more than 3 years from the "CODE" (date of manufacture) number noted on the pump name plate.

The manufacturer's obligation under this Warranty shall be limited to the repair or replacement of any parts found by the manufacturer to be defective, provided the part or assembly is returned freight prepaid to the manufacturer or authorized service center, and provided that none of the following warranty-voiding characteristics are evident:

The manufacturer shall not be liable under this Warranty if the product has not been properly installed; if it has been disassembled, modified, abused or tampered with; if the electrical cord has been cut or spliced; if the pump discharge has been reduced in size; if the pump has been used in water temperatures above the advertised rating; if the pump has been used in water containing sand, lime, cement, gravel or other abrasives; if the product has been used to pump chemicals or hydrocarbons; if a non-submersible motor has been subjected to excessive moisture; or if the label bearing the serial and code number has been removed.

Liberty Pumps, Inc. shall not be liable for any loss, damage or expenses resulting from installation or use of its products, or for consequential damages, including costs of removal, reinstallation or transportation.

There is no other express warranty. All implied warranties, including those of merchantability and fitness for a particular purpose, are limited to three years from the date of purchase. This Warranty contains the exclusive remedy of the purchaser, and, where permitted, liability for consequential or incidental damages under any and all warranties are excluded.